DEVELOPMENT
-
Wiring print
- Circuit pattern print using conductive ink by inkjet printing.
We realize lower cost in this process.
Printing Equipment
It can be printed by following equipment
-
Color decoration print
- Existing printing has been mainly focused on functional coating, such as transparent layer
and black mask layer (light shielding flayer) etc.
We have been researching and developong an ink with ink manufacturer
to be able to correspond color design for back side of the smartphone.
We are challenging variety of design using on-demand print which is one of characteristic of inkjet printer.
Printing Equipment
It can be printed by following equipment
-
Waveform
- "Waveform is necessary for jetting from inkjet printer nozzles.
We prepare various type of waveforms.
Also, we have Drop Watcher (Ink drop monitoring system) and wavefrom creating tool to make suitable waveforms.
We can customise waveforms by customer’s request.
(Price and lead time are to be discussed.)"
Printing Equipment
It can be printed by following equipment
-
Insulation Layer
- Printed insulating materials that cross the vertical and horizontal wiring of capacitive touch panel sensor circuit. The production costs will be significantly reduced compared to traditional photo-etching process, however, ink dropping position accuracy and the dropping shape repeatability are required.
Printing Equipment
It can be printed by following equipment
-
Alignment Layer
- Printed PI alignment layer for LCD panel by inkjet printer. Acheived high-resolution printing to meet requirements of coating uneven parts of TFT substrates for smartphones, layer surface uniformity (without mura), and printing position position accuracy.
Printing Equipment
It can be printed by following equipment
-
Over Coat Layer
- Printed overcoat materials, that protect the peripheral circuits of the display. It covers each parts with different contact angles such as ITO and metal wiring.
Printing Equipment
It can be printed by following equipment
-
QR Code
- Printed symbol on a PCB substrate. It can also realize QR code. This picture shows 4.6mm X 4.6mm sized object (code).
Printing Equipment
It can be printed by following equipment
-
Light Sheilding Layer
- Printed black light sheilding layer on a cover glass of smart phone, achieved printing without hole shape for camera, sensor and speaker.
Printing Equipment
It can be printed by following equipment
-
FPC wiring
- Printed wiring patterns on polyimide film using Ag nano ink. It is possible to print on PET film as well.
Printing Equipment
It can be printed by following equipment
-
Marking
- Printed ruled lines, characters, QR codes, etc. on a large and long steel plate (iron) with 5m width and 25m length at transport speed of 6.5m / min. This type of printing is used shipbuilding and cutting of bridge members.
Printing Equipment
It can be printed by following equipment
-
OCR
- To bond touch panel and LCD module, Optical Clear Adhesive (OCA) in sheet form and OCR (Optical Clear Resin) in liquid form are filled, and to improve the visibility, optical bonding is adopted. Print OCR with inkjet to reduce its cost, improve its shape and defects.
Printing Equipment
It can be printed by following equipment
-
Light Guide Plate
- Printed regular pattern placed large number of micro lenses. Those micro lenses are used as backlight for light guide plate and lighting device. The based coat layer for lens formulation is also printed by the inkjet printer. LED Lighting from side of an acryl sheet, and the micro lenses refract to light front side.
Printing Equipment
It can be printed by following equipment
-
Curved Glass OCR
- Used adhesiveness improved low temp. dry ink for 50μm thickness PET, and it passed PEEL (tape peeling) test.
Printing Equipment
It can be printed by following equipment
-
Glass Reinforcing Material
- The cover glass for mobile device, such as smartphones and tablets uses flat glass (2.5D) and edge curved glass (3D). Inkjet printer realize printing the glass reinforcing material to prevent glass breakage. Because the ink is transparent, it is necessary to print with a uniform thickness layer without any mura (unevenness).
Printing Equipment
It can be printed by following equipment
-
3D Cover Glass besel
- Bezel printing on 3D glass for smartphones requires extremely high precision and quality.
Printing Equipment
It can be printed by following equipment
-
Cover Glass Decoration
- Variation of the colors are now increased, more design-oriented printing can be achieved.
Printing Equipment
It can be printed by following equipment
-
Cover glass for Vehicle
- Curved glasses are used for vehicle CID and instrument panel due to its design. Non-contact printing by inkjet printer demands are increasing as conventional screen printing cannot archive. We use a robot to keep the position of the glass and the inkjet print head, and print a black light shield layer.
Printing Equipment
It can be printed by following equipment
-
Ceramic tile
- Printed on ceramic tyles by inkjet printer, which is well-known recently. Our print head has advantage for large particle type colored ink
Printing Equipment
It can be printed by following equipment
-
Siding (Wood tone)
- Printed wooden pattern on a outer wall panel for architectural structure, achieved real picture quality print with very vivid color.
Printing Equipment
It can be printed by following equipment
-
Siding (Stone tone)
- Printed granite pattern. The based substrate with pressed uneven surface and print the pattern makes shading like real stone.
Printing Equipment
It can be printed by following equipment
-
Large Side Cover Glass for Vehicle
- The recent trend of Vehicle display, should be replaced to larger, seemless and more like 3 dimentional and design-oriented glass panel. Printed half-transparant and light sheild surrounding layer on 1m curved glass.
Printing Equipment
It can be printed by following equipment
